Rank: Member
Groups: Member
Joined: 10/12/2007
Posts: 15
Location: Sydney
|
Getting myself a new driver and have narrowed it down to a couple of choices, Ping G10 or Mizuno MP-600
Currently playing an old Titleist 983E 8.5* GD YS-6 S, tried out a D2 for a few weeks but never liked the feel of it. Swing speed is 115-120 mph and I have a bit of a flat swing so generate a hell of a lot of backspin thus height. Distance is averaging out around the 270-75m mark and currently playing off 4
Specs of the clubs I am looking at are:
G10 - 7.5* Graffalloy Prolaunch Red X Stiff
MP-600 - 8.5* Fujikura E360 X Stiff
Pretty hard to find any demo's out there with X Stiff shaft so has been difficult to have a swing with both in the specs I'm after. Anyone had any experience with these Head/Shafts that you could share?
Cheers
|
Rank: Sports Guru
Groups: Member
Joined: 3/14/2006
Posts: 892
Location: Kilsyth South
|
friend has a ping driver. goes alright. i would go with 8.5 degrees of loft. i have a 10 degree and don't get a lot of run but bomb it about 250 so get 10 metres of roll. 7.5 is very low and actually never new you could get one with such low loft. i have a S shaft on my driver so an XS shaft with the swing speed and considering your off 4 is fair. i suggest you go to a golf shop if you already haven't and look around and try some out or the other option is try callaway club fitting shops which allow you to try different shafts on different clubs and you are able to see how far you will hit it with all different things about your ball flight. from what you are choosing from, i would go the Mizuno
|
Rank: Advanced Member
Groups: Member
Joined: 7/22/2005
Posts: 104
Location: Sydney
|
I reckon you should try get the proforce V2 in X-flex with the Ping G10.
|
